Forrest WW10307100 Woodworker II 10-Inch 30 Tooth 5/8-Inch Arbor 3/32-Inch Kerf Circular Saw Blade

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and re-straightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind its blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Forrest Woodworker 1 Saw Blade For Radial and Table Saws. These trim and cross-cut ALL PURPOSE blades give scratch-free POLISHED cuts on wood, RIP or CROSSCUT, up to 2-inches thick. They have a 30 degree Alternate Top Bevel with a 5 degree Face Hook on 10-inch diameters and smaller.
Customer Review: Good- but not as good as the 40 tooth version
I bought this as a less-costly replacement for a 40 tooth thin kerf WWII that I accidently ran a screw through and broke off twelve teeth. This was touted as almost as good and a good choice for an underpowered saw. I used this with my 1.5 hp. unisaw with the stabilizer disc. I would agree that it is almost as good as the 40 tooth and is better than the other brands I have used. It tends to burn more than the 40 tooth with not quite as clean a glue line, and for the results, I would spend the extra money for the 40 tooth, as the results with it are fantastic.
Customer Review: Forrest is TOP quality
I have a very nice cabinetmaker's shop, and appreciate good tools, both hand and machine. This is the third Forrest blade I've bought, because they are SO superior to other brands. (I also have their 80 tooth crosscut, and a thin kerf combo blade). I even quit having my saw/planer/jointer blades sharpened locally, because Forrest does such a superior job sharpening all of these. It's not as convenient, but the quality is worth it. You will NOT regret spending the money for this blade.


saw blade Wikipedia

Freud LM72M008 8-Inch 24 Tooth FTG Ripping Saw Blade with 5/8-Inch Arbor

8"x24t flat top industrial heavy duty rip blade. Ideal for glue line ripping in hardwood and softwood from 3/4" to 2-3/4" thick.These blades are precision balanced and can be used in gang-rip operations.


saw blade Wikipedia

Forrest NM1410011145 No Melt 14-Inch 100 Tooth 1-Inch Arbor 9/64-Inch Kerf Plastic Cutting Circular Saw Blade

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. The NO-MELT carbide-tipped saw blade is especially designed for cutting single or multiple stacked sheets of plastic without chipping or melting these materials. NO-MELT blades are particularly suitable for acrylics, delrins, ABS (Coycolac), styrenes, PVC, and both high and low melt nylons. Specially engineered side clearances on the carbide teeth significantly reduced and in many cases, totally eliminate any formation of melted burrs of buildup of residue on cross-sawn sections of plastic materials. Made with DOUBLE-HARD and 40% stronger #C4 Carbide. 50% to 300% Longer Life Between Sharpenings, Reduced Yearly Sharpening Costs, Less Machine Downtime, Improved Labor Efficiency, Inventory Savings -- Fewer Blades Required.


saw blade Wikipedia

Freud Inc D0724X Diablo Carbide Tipped Circular Saw Blade

Super thin laser cut kerf (small diameter blades only) provides faster, cleaner, more exacting cuts. Perma Shield coating shields blade against heat, gumming, and corrosion. Durable micrograin titanium carbide tipped teeth are impact resistant to hold the


saw blade Wikipedia

Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and re-straightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind its' blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Forrest Woodworker 1 Saw Blade For Radial and Table Saws. These trim and cross-cut ALL PURPOSE blades give scratch-free POLISHED cuts on wood, RIP or CROSSCUT, up to 2-inches thick. They have a 30-degree Alternate Top Bevel with a 5-degree Face Hook on 10-inch diameters and smaller.
Customer Review: Disappointed
I bought this blade because of someone's recommendation. I am disappointed with the performance of this blade as it causes a lot of burnt marks on my wood, both solid and plywood. It also does not cut as smoothly as my lower cost blades. May be it needs to be sharpened but it is brand new and I can't find anyone locally to sharpen it.
Customer Review: Woodworker II Rocks!
Truly the finest blade I have ever used. It sliced through 2 inch thick Hard Maple and Purple Heart like a hot knife through butter. I highly recommend this blade!


saw blade Wikipedia

Forrest MM09802 Miter Master 9-Inch 80 Tooth 5/8-Inch Arbor .105-Inch Kerf Aluminum Cutting Circular Saw Blade

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Recommended for: thin, low pressure, two-sided laminates, plywood & fine cross cutting on all woods. Eliminates need for a small scoring saw blade on table saw work. The 40° points slice through thin bottom layers with no tears or chips. Reduced yearly sharpening costs - less machine downtime.


saw blade Wikipedia

Freud LM72M012 12" Diameter x 30T FLAT Heavy-Duty Rip Carbide-Tipped Saw Blade with 1" Arbor (.169 Kerf)

Freud's LM72M Industrial Rip blades are the industry standard for glue line ripping of hard and soft woods from 3/4 to 2-3/4 inches thick. Featuring extra rigid blade bodies and flat top micrograin carbide teeth, these blades give the straightest, smoothe
Customer Review: Very Good Quality Blade
This blade was installed on a glue line rip saw.Did a run of Mahogany that was burning with the other blades that we had.I then installed the Freud blade and got very good results.The teeth and carbide are large,so you can figure on several resharpenings.Best of all was the price.I will probably order 2 more soon.


saw blade Wikipedia

Freud LM74M010 10-Inch 30 Tooth TCG Glue Line Ripping Saw Blade with 5/8-Inch Arbor and Silver ICE Coating

The Freud Difference
Freud manufactures some of the most innovative, technologically advanced saw blades in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo -- a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry.

About Freud Industrial Blades
Freuds industrial series blades were designed for the serious woodworker. Available in a variety of styles for different applications, LU blades feature thick carbide tips, precision-tensioned bodies found in every Freud quality blade. Some LU blades include a red Teflon coating that helps reduce friction, heat build-up, and gumming -- which prolongs the life of the blade.

About this Glue Line Ripping Saw Blade
This Freud blade has a triple chip-Tooth design that produces extremely smooth, true surfaces for gluing and finish work, so there's no need for sanding or jointing after the cut. The ideal working range is from 1/8 to 1-inch thick. This blade also features laser-cut anti-vibration slots, which practically eliminate the vibration that resonates in standard blades. With this ultimate ripping blade, you won't need any stabilizers.

Applications
This heavy duty glue line ripping blade is ideal for creating superior finishes in natural woods.

Key Tech Specs:

• 1/8-inch minimum depth of cut
• 1-inch maximum depth of cut
• Silver I.C.E. coating
• Tri-Metal Brazing for impact-resistant tips

Warranty
This blade is covered by Freud's limited lifetime warranty.
Customer Review: Great Ripping Blade
I'm very happy with this blade. I am new to Woodworking but have spared no expense in getting good equipment. I started with a Forest Woodworker II. It's good, but I think it's main advantage is being able to rip and cross-cut. If you want great results, the customized blades still work much better. I'm amazed at how little force it takes to rip white oak with this blade. The cut is clean and burn free.
Customer Review: Clean cuts at last
I had put off getting a good rip blade, but finally became frustrated with the results using my general purpose blade. What a difference! This blade delivered what was promised -- a smooth, glue ready rip cut. I am very pleased with the product. Jim Crescenzi


saw blade Wikipedia

Forrest NM108011125 No Melt 10-Inch 80 Tooth 5/8-Inch Arbor 1/8-Inch Kerf Plastic Cutting Circular Saw Blade

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Recommended for: thin, low pressure, two-sided laminates, plywood & fine cross cutting on all woods. Eliminates need for a small scoring saw blade on table saw work. The 40° points slice through thin bottom layers with no tears or chips. Reduced yearly sharpening costs - less machine downtime.


saw blade Wikipedia

Forrest MM10102 Miter Master 10-Inch 100 Tooth 5/8-Inch Arbor .105-Inch Kerf Aluminum Cutting Circular Saw Blade

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Forrest Woodworker 2 Saw Blade For Table Saws. With this one all purpose blade you can RIP & CROSSCUT 1" to 2" hardwood and softwood resulting in a smooth as sanded surface. Ply-veneers of oak and birch will crosscut with NO BOTTOM SPLINTER at moderate feed rates. Customized Forrest Woodworker 2 For Table Saws. For the advanced table saw operator. Ideal for joinery and special uses. Specially engineered clearances on the carbide teeth can totally eliminate side scoring. The result...no planing/jointing or sanding. In many cases a glue-line cut can be obtained, depending on the accuracy of the saw machine.


saw blade Wikipedia

Freud D0640X Diablo 6-Inch 40 Tooth ATB Trim Saw Blade with 1/2-Inch Arbor

The Freud Difference
Freud manufactures some of the most innovative, technologically advanced woodworking tools and accessories in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo -- a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry.

About Freud Saw Blades
A world leader in cutting tool technology, Freud has earned a reputation for quality woodworking tools and accessories. With several unique design features, Freud saw blades are among the longest lasting and best performing blades in the industry. Choose from a variety of blade designs, sizes and coatings to select the best blade to suit your project.

About this Trim Saw Blade
This Diablo saw blade from Freud is designed to meet the needs of the construction and remodeling market. This advanced laser-cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite; and the permanent Perma-Shield coating keeps this blade free from gumming and corrosion. Its laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This trim saw blade is proven to extend run time on Porter Cable, Saw Boss, and similar trim saws.

Warranty
This blade is covered by Freud's limited lifetime warranty.
Customer Review: Excellent Blade
I had a tough time finding a 1/2 inch arbor for my old circular saw. I found this one at Amazon and have been very satisfied with its performance. The thin kerf is very helpful on delicate cuts.
Customer Review: saw blade
Good blade for the price. Teflon coating reduces drag and heat build up. You get a nice smooth cut with this blade.


saw blade Wikipedia

Forrest NM086011100 No Melt 8-Inch 60 Tooth 5/8-Inch Arbor 3/32-Inch Kerf Plastic Cutting Circular Saw Blade

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. The NO-MELT carbide-tipped saw blade is especially designed for cutting single or multiple stacked sheets of plastic without chipping or melting these materials. NO-MELT blades are particularly suitable for acrylics, delrins, ABS (Coycolac), styrenes, PVC, and both high and low melt nylons. Specially engineered side clearances on the carbide teeth significantly reduced and in many cases, totally eliminate any formation of melted burrs of buildup of residue on cross-sawn sections of plastic materials. Made with DOUBLE-HARD and 40% stronger #C4 Carbide. 50% to 300% Longer Life Between Sharpenings, Reduced Yearly Sharpening Costs, Less Machine Downtime, Improved Labor Efficiency, Inventory Savings -- Fewer Blades Required.


saw blade Wikipedia

Forrest MM09806 Miter Master 9-Inch 80 Tooth 5/8-Inch Arbor .105-Inch Kerf Wood Cutting Circular Saw Blade

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Recommended for: thin, low pressure, two-sided laminates, plywood & fine cross cutting on all woods. Eliminates need for a small scoring saw blade on table saw work. The 40° points slice through thin bottom layers with no tears or chips. Reduced yearly sharpening costs - less machine downtime.


saw blade Wikipedia

Freud LU77M008 8" Diameter x 64T TCG Thin Kerf Non-Ferrous Metal Carbide-tipped Saw Blade with 5/8" Arbor (.083 Kerf)

Industrial Thin Kerf Non-Ferrous Metal Blade TCG 8"x58t 5/8"arbor. Long life and burr-free cuts in 1/4" max. thick non-ferrous materials.


saw blade Wikipedia